BipodeXt TAC, better known as BipodeXt MSR, PRS, and ELR

At Accuracy Solutions, we have gone to great lengths to provide you with the ultimate precision shooting experience.

We’re consistently updating our product line to ensure we utilize the latest technologies and incorporate your feedback to maximize your accuracy in the field. In line with using the latest technologies and naming conventions in the market, we made some changes to our BipodeXt product line:

This Single Mount model is rated for cartridges up to, and including, .30-06. This unit ships without rails or accessories. If you need those, visit our Accessory Rails page.
This model, designed to attach utilizing an ARCA-rail QD mounting system, contains two telescoping carbon fiber tubes. It provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine-style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt TAC II ARCA Rail Single Mount is made with the same engineered tolerance requirements as its larger brother, namely the TAC III Gen2. The TAC II product was designed and engineered by Accuracy Solutions LLC to provide the perfect fit for practically all field applications. The BipodeXt TAC III ARCA Spec allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40 mm (1.575”), and it weighs less than 27 oz.
The TAC II ARCA Spec Single Mount is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, 30-06. 

The ARC II ARCA Swiss Spec Single Mount is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, 30-06.
The BipodeXt ARC II ARCA Spec is identical to our U.S.-made TAC II Gen2 ARCA Spec, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC II and our U.S.-made TAC II Gen2. Even the warranty is the same: limited lifetime.
This model, designed to attach utilizing an ARCA-rail QD mounting system, contains two telescoping carbon fiber tubes. It provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine-style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt ARC ARCA Species made with the same engineered tolerance requirements as its larger brother and U.S.-born cousins, namely the TAC II Gen2 and TAC III Gen2. The ARC II product was designed and engineered by Accuracy Solutions LLC to provide the perfect fit for practically all field applications. The BipodeXt ARC III ARCA Spec allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40mm (1.575”), it weighs less than 27 oz.
The ARC II ARCA Spec Single Mount is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, 30-06.

Maximum Caliber: .338 LPM
Maximum Rifle Weight: 30 lbs./13.607 Kgs.
Materials: 3K Carbon Fiber, Brass, Alloy Steel and Aluminum 6061 T6
Coating: Type III Class 2 MIL-A-8625
Measurements: Contracted: 15”/381 mm. Extended: 21.5”/546 mm
Weight: 30 oz. / 850 grs.
Width Of Each Mounting Post: 2”
Min. ARCA Rail Required: 5.25”/133 mm
Color: Black.
Number Of Carbon Fiber Tubes: Two
UPC: 850038862190
SKU: BipodeXt G3 ARC II ARCA DM
MPN: AS-202201
Origin: Assembled and quality controlled in the USA. Made with globally sourced components.This product is identical to his 100% made-in-America counterpart, the BipodeXt TAC II Gen3 ARCA Dual Mount.
Our TAC and ARC line of products carry the same limited lifetime warranty.
Due to legalities, the product box reads “Made in China”, which is the largest source of its components.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
The TAC II Gen2 is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.
The BipodeXt TAC II Gen2 Picatinny is the compact brother of our flagship model, the TAC III Gen2. This model contains only two, 100% USA made, telescoping carbon fiber tubes. This provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt TAC II Gen2 is made here, in the USA, with the same engineered tolerance requirements as its larger brother, the TAC III Gen2. Both products were specifically designed and engineered by Accuracy Solutions to provide the perfect fit for practically all field applications. The BipodeXt TAC II Gen2 allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40mm (1.575”), it weighs less than 27 oz.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
The BipodeXt ARC II Picatinny is identical to our U.S.-made TAC II Gen2, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC II and our U.S.-made TAC II Gen2. Even the warranty is the same: limited lifetime.
This model contains two telescoping carbon fiber tubes. It provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt ARC II Picatinny is made  with the same engineered tolerance requirements as its larger brother and U.S. born cousins, namely the ARC III and the TAC II Gen2 and TAC III Gen2. The ARC II product was  designed and engineered by Accuracy Solutions LLC to provide the perfect fit for practically all field applications. The BipodeXt ARC III Picatinny allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40mm (1.575”), it weighs less than 27 oz.
The ARC II Picatinny is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
The ARC II ARCA Spec Dual Mount is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.
The BipodeXt ARC II ARCA Spec is identical to our U.S.-made TAC II Gen2 ARCA Spec, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC II and our U.S.-made TAC II Gen2. Even the warranty is the same: limited lifetime.
This model, designed to attach utilizing an ARCA-rail QD mounting system, contains two telescoping carbon fiber tubes. It provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt ARC ARCA Spec Dual Mount is made  with the same engineered tolerance requirements as its larger brother and U.S. born cousins, namely the TAC II Gen2 and TAC III Gen2. The ARC II product was  designed and engineered by Accuracy Solutions LLC to provide the perfect fit for practically all field applications. The BipodeXt ARC III ARCA Spec allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40 mm (1.575”), it weighs less than 27 oz.
The ARC II ARCA Spec Dual Mount is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
This Dual Mount model is rated for cartridges up to, and including, .338 LPM
The BipodeXt TAC II Gen2 ARCA Spec Dual Mount is the ARCA rail version of our TAC II Gen2 Picatinny model. This model contains only two, 100% USA made, telescoping carbon fiber tubes. This provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt TAC II Gen2 ARCA Spec Dual Mount is made here, in the USA, with the same engineered tolerance requirements as its larger brother, the TAC III Gen2. Both products were specifically designed and engineered by Accuracy Solutions to provide the perfect fit for practically all field applications. The BipodeXt TAC II Gen2 ARCA Spec utilizes an ARCA-rail QD mount and allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40mm (1.575”), it weighs less than 27 oz.
The TAC III Gen2 ARCA Spec Dual Mount is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.

 

The BipodeXt TAC II Gen2 is the compact brother of our flagship model, the TAC III Gen2. This model contains only two, 100% USA made, telescoping carbon fiber tubes. This provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt TAC II Gen2 is made here, in the USA, with the same engineered tolerance requirements as its larger brother, the TAC III Gen2. Both products were specifically designed and engineered by Accuracy Solutions to provide the perfect fit for practically all field applications. The BipodeXt TAC II Gen2 allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40mm (1.575”), it weighs less than 27 oz.
The TAC II Gen2 is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.

 

The ARC II Picatinny is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.
The BipodeXt ARC II  is identical to our U.S.-made TAC II Gen2, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC II and our U.S.-made TAC II Gen2. Even the warranty is the same: limited lifetime.
This model contains two telescoping carbon fiber tubes. It provides the shooter with a single extension in a compact system tailored for weapons with shorter barrels that are still in use as precision shooting platforms. Our progressive wall thickness telescoping tube design allows the shooter to extend the resting point (fulcrum) to the muzzle of most carbine style rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. Recoil is mitigated and easier to manage; shooters are often heard saying “I can spot my own shots!”.
The BipodeXt ARC II is made  with the same engineered tolerance requirements as its larger brother and U.S. born cousins, namely the TAC II Gen2 and TAC III Gen2. The ARC II product was  designed and engineered by Accuracy Solutions LLC to provide the perfect fit for practically all field applications. The BipodeXt ARC III allows the shooter to move the resting point of their weapon approximately 44 inches away from the toe of the rifle. Fully extended it measures 21.3 inches. Contracted it measures 14 inches. The O.D. of its base tube is 40 mm (1.575”), it weighs less than 27 oz.
The ARC II Picatinny is rated for rifles weighing up to 29 lbs. and cartridges up to, and including, .338 LPM.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
This Single Mount is rated for cartridges up to, and including, 30-06.
This unit mounts on ARCA Swiss rails.  The TACs Gen2 feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The BipodeXt TAC III ARCA Spec Single Mount offers a large QD lever in its ARCA-rail Unimount. A single 2.5″ long locking bar provides for a fast, easy and secure attachment (and detachment). Our telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt TAC III ARCA Spec Single Mount allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt TAC III ARCA Spec Single Mount has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of most rifles.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40mm (1.575”), and it weighs less than 32 oz.
The BipodeXt TAC III ARCA Spec Single Mount is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, 30-06.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
The BipodeXt ARC III Arca Spec Single Mount is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, 30-06.
The BipodeXt ARC III ARCA Spec  is identical to our U.S. made TAC III Gen2 ARCA Spec, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC III ARCA Spec and our U.S. made TAC III Gen2 ARCA Spec. Even the warranty is the same: limited lifetime.
The ARCs  feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The BipodeXt ARC III ARCA Spec Single Mount offers a large QD lever in its ARCA-rail Unimount that provide for a fast, easy and secure attachment (and detachment). Our telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt ARC III ARCA Spec allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt ARC III ARCA Spec has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of most rifles.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40 mm (1.575”), and it weighs less than 32 oz.
The BipodeXt ARC III Arca Spec Single Mount is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, 30-06.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
The TAC line is made here, in the USA.
The BipodeXt TAC III Gen2 is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.
The BipodeXt TAC III Gen2 is our current flagship model, and extreme long-range precision shooting is where it shines. The Gen2’s feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The BipodeXt TAC III Gen2 offers large QD levers in its Unimount that provide for a fast, easy and secure attachment (and detachment). Our 100% USA made, telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt TAC III Gen2 allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt TAC III Gen2 has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of the rifle.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40mm (1.575”), and it weighs less than 32 oz.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
The BipodeXt ARC III  Picatinny is identical to our U.S. made TAC III Gen2, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC III and our U.S. made TAC III Gen2. Even the warranty is the same: limited lifetime.
The BipodeXt ARC III  is our (globally sourced) current flagship model, and extreme long-range precision shooting is where it shines. The ARCs feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The BipodeXt ARC III Picatinny offers large QD levers in its Unimount that provide for a fast, easy and secure attachment (and detachment). Our telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt ARC III allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt ARC III has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of the rifle.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40 mm (1.575”), and it weighs less than 32 oz.
The BipodeXt ARC III Picatinny is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.

 

This unit ships without rails or accessories. If you need those, please visit our Accessory Rails page.
The BipodeXt ARC III ARCA Spec Dual Mount is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.
The BipodeXt ARC III ARCA Spec  is identical to our U.S. made TAC III Gen2 ARCA Spec, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC III ARCA Spec and our U.S. made TAC III Gen2 ARCA Spec. Even the warranty is the same: limited lifetime.
The ARCs  feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The BipodeXt ARC III ARCA Spec Dual Mount offers two large QD levers in its ARCA-rail Unimount that provide for a fast, easy and secure attachment (and detachment). Our telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt ARC III ARCA Spec allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt ARC III ARCA Spec has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of most rifles.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40mm (1.575”), and it weighs less than 32 oz.
The BipodeXt ARC III ARCA Spec is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.

 

This Dual Mount is rated for cartridges up to, and including, .338 LPM.
The BipodeXt TAC III Gen2 ARCA Swiss Spec Dual Mount is the ARCA Swiss Rail version of our flagship model, and extreme long-range precision shooting is where it shines. The Gen2s feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The TAC III Gen2 ARCA Swiss Spec Dual Moun offers large QD levers in its Unimount that provide for a fast, easy and secure attachment (and detachment). Our 100% USA made, telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt TAC III Gen2 allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt TAC III Gen2 has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of the rifle.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40mm (1.575”), and it weighs less than 32 oz.
The BipodeXt TAC III Gen2 ARCA Swiss Spec Dual Mount is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.

 

This unit ships with our Picatinny Rails Bundle (a $99 value).
The BipodeXt TAC III Gen2 is our current flagship model, and extreme long-range precision shooting is where it shines. The Gen2’s feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The BipodeXt Gen II offers large QD levers in its Unimount that provide for a fast, easy and secure attachment (and detachment). Our 100% USA made, telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt TAC III Gen2 allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt TAC III Gen2 has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of the rifle.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40mm (1.575”), and it weighs less than 32 oz.
The BipodeXt TAC III Gen2 is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.

 

The BipodeXt ARC III Picatinny is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.
The BipodeXt ARC III  is identical to our U.S. made TAC III Gen2, with one exception: we source its components from various countries so that we can offer it at the best possible value. Other than the origin of its parts, there are no differences between the ARC III and our U.S. made TAC III Gen2. Even the warranty is the same: limited lifetime.
The BipodeXt ARC III Picatinny is our (globally sourced) current flagship model, and extreme long-range precision shooting is where it shines. The ARCs feature the following improvements over the original TACs:

  • Lower center of gravity (by over 1 inch)
  • Lighter weight
  • Stronger mounting caps
  • Better priced
The BipodeXt ARC III offers large QD levers in its Unimount that provide for a fast, easy and secure attachment (and detachment). Our telescoping carbon fiber extension tubes were designed, engineered, tested and refined here, in the U.S.A, to meet our exacting tolerance requirements. The BipodeXt ARC III allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting “I can spot my own shots!”.
The BipodeXt ARC III has the ability to extend the resting point of the rifle system approximately 54 inches away from the toe of the rifle.  This extension provides for a very powerful “reversed lever functioning”, offering increased accuracy potential with this added stability. Fully extended it measures 31.4 inches, contracted it measures under 15.5  inches. The O.D. of its base tube is 40mm (1.575”), and it weighs less than 32 oz.
The BipodeXt ARC III is rated for rifles weighing up to 25 lbs. and cartridges up to, and including, .338 LPM.

 

Rated for up to 65 lbs. rifles and designed to accommodate those very large calibers like .50 BMG, .408 Cheytac, .416 Barrett, and more
Please note that this model calls for an at least 7″ long (or 17+ slots) Picatinny rail. We include a 10″ Picatinny rail with this product.
The BipodeXt ELR Gen2 Picatinny is our current Big Bore flagship bipod extension model, and extreme long-range precision shooting with large rifles (up to .50 cal and up to 65 lbs.) is where it shines.
The BipodeXt ELR Gen Picatinny offers three large QD levers in its Unimount that provide for a fast, easy, and secure attachment and detachment. Our telescoping carbon fiber tubes were designed, engineered, tested, and refined here in the U.S.A to meet our exacting tolerance requirements. The BipodeXt ELR Gen2 Picatinny allows the shooter to extend the resting point (fulcrum) beyond the muzzle of most rifles, thus reducing the point of impact shift caused by unintentional movement at the toe of the rifle system. As additional benefits, recoil is mitigated and significantly easier to manage; target re-acquisition time is reduced by multiples. Shooters are often heard shouting, “I can spot my own shots!”.
The BipodeXt ELR Gen2 Picatinny can extend the resting point of the rifle system approximately 65 inches away from the toe of the rifle.  This extension provides a powerful “reversed lever functioning,” offering increased accuracy potential with this added stability.
The BipodeXt ELR Gen2 Picatinny is rated for rifles weighing up to 65 lbs. and cartridges up to, and including, .50 BMG.
Close
Close
Sign in