|Weapon Attachment Type||
Arca Swiss, Picatinny
ARCA Swiss: 7 inch rail, Picatinny: 17 Slots (7 in / 179 mm)
|Bipod Mount Types||
ARCA Swiss, Harris (with Accuracy Solutions adapter), Picatinny
|Max Caliber Arca||
|Max Caliber Picatinny||
|Max Rifle Weight||
3 lbs. 15 oz/1,429 kgs.
|Product Length Contracted||
|Product Length Extended||
|Materials & Finishes||
3K Carbon Fiber, 6061 T6 Aluminum Alloy, Alloy Steel, Brass, Type 3 Hardcoat Anodizing
BipodeXt ELR Max DUAL Rifle Stabilizer
We are introducing BipodeXt ELR Max DUAL Stabilizer. The most advanced, universal, innovative, and most rapidly adopted precision rifle stabilizer from the most discerning shooters worldwide.
As its name implies, the DUAL can be configured to either of the two widely available mounting systems: ARCA Swiss and Picatinny.
Rated for up to 65 lbs. rifles and designed to accommodate very large calibers like .416 Barrett, .460 Steyr, .50 BMG and more.
WARNING: BIG-BORE RIFLES CAN HAVE NASTY RECOILS. Be careful when operating a BipodeXt ELR Max Dual configured with ARCA Swiss mounts. Check often to ensure that the BipodeXt is not creeping out of your ARCA Swiss rail during the firing sequence.
Want to know more? Click More Details below.
Only logged in customers who have purchased this product may leave a review.
The BipodeXt ELR Max DUAL has all the characteristics of its legendary older brother, the ELR Max. However, the DUAL brings even more to the table: convertibility. The ELR Max DUAL’s mount-to-stock, or chassis, can be easily converted from ARCA Swiss to Picatinny and vice versa.
Everything needed to perform the easy and quick conversion is included in the box. All required to carry out the changeover is the removal and reattachment of six (6) easily accessible screws.
The BipodeXt ELR Max DUAL offers three large QD levers in its Unimount that provide fast, easy, and secure attachment and detachment. The ELR Max DUAL allows the shooter to extend the resting point of the rifle (fulcrum) more than 27 inches forward of the typical bipod placement area. This is sufficient to place the bipod at or near the muzzle of many big-bore rifles.
This triple mount, two extending tubes, model is rated for cartridges up to .50 BMG. The maximum supported rifle weight is 65 lbs./29.483 kg.
Fully extended, the BipodeXt ELR Max measures 40.5 inches/1,028 mm; contracted, it measures 20.5 inches/521 mm. The O.D. of its base tube is 2.25 inches/57.15 mm. It weighs 3 lbs. 15 oz/1.429 kg.
REFINED AND IMPROVED
This is the third generation (Gen3) of the BipodeXt ELR. Its Front Plug can take three different types of bipods:
- ARCA Swiss
- Harris (via our separate adapter)
The ARCA Swiss side of the Front Plug has three (3) 10-32 tapped holes. Those holes can take Picatinny rails and our famous Queen’s Equalizer Kit, which lowers the center of gravity of the rifle (depending on the installation method) from 2 inches/51 mm to 2.875 inches/71 mm.
The three short Picatinny rails affixed to the outer tube provide for the mounting of accessories, such as the popular MagnetoSpeed (via our separate adapter).
The bottom side of the Unimount base is made to ARCA Swiss rail specs, which allows mounting additional accessories, such as the LRA’ Send-It electronic levels (via an ARCA adapter that we make).
Our telescoping 3K carbon fiber tubes are designed, engineered, tested, and refined in the U.S.A. to meet the highest tolerance requirements.
EASY CANT CORRECTION
The round tubes allow for easy cant correction. In most cases, shooters can correct cant by operating the BipodeXt’s Base Clamp lever without getting out from behind their rifles. No longer does the shooter have to work the bipod to correct cant. With BipodeXt installed, in many cases, cant can be rectified right from the shooting position. It may not be necessary to explain how much time this single feature can save.
IMPROVED RECOIL MANAGEMENT
Additional benefits of running a BipodeXt are that recoil is mitigated and significantly easier to manage. Target re-acquisition time is reduced by multiples. Shooters are often heard exclaiming, “I can spot my shots!” This model calls for an at least 7 inch/178 mm long (or 17+ slots) Picatinny rail or 7 inch/178 mm ARCA Swiss rail on the rifle’s fore-end. We include a 7 inch/178 mm Picatinny rail with this product. Do you need different rails? Please visit our Accessories page
There are no reviews yet.