Mounting Post Single Gen4 (ARCA & Picatinny All-In-One)
Single A&P Mount on PRS
Mounting Post Single Gen4 (ARCA & Picatinny All-In-One) - Image 3
Mounting Post Single Gen4 (ARCA & Picatinny All-In-One) - Image 4
Mounting Post Single Gen4 (ARCA & Picatinny All-In-One) - Image 5

Mounting Post Single Gen4 (ARCA & Picatinny All-In-One)

NEW FOR 2026

All-In-One ARCA & Picatinny (A&P) Gen4 Mounting Posts

Earlier generations of our Mounting Posts required separate ARCA or Picatinny mounting posts and a conversion process to move between them. Gen4 fixes that.

  • Clamps directly to both ARCA Swiss and Picatinny rails
  • Has an easy-to-operate clamping tension knob (no tools required)
  • Lets you move your stabilizer between rifles with different rails in seconds, with no tools and no post changes

This is our Single Mounting Post Gen4. It is 2.75” long; thus, it requires a minimum of 2.75″ of ARCA or Picatinny rail on the rifle’s fore-end.

Compatible with our Gen3 line of BipodeXt. If your existing BipodeXt has removable Mounting Posts, it will accept these Gen4 All-In-One A&P Mounting Posts. The upgrade process is as simple as removing and re-attaching a few easily accessible screws. All the hardware and tools needed to perform the upgrade are included in the box.

$79.00

In stock

UPC N/A SKUMOUNT-A&P SINGLE ASSEMBLY Categories,
Close
Product Specs

This upgrade kit includes:

  • BipodeXt A&P Single Mounting Post Gen4 (x 1)
  • 10-32×3/8″ Socket Head Hex Drive screws (x 2)
  • 5/32″ Hex Key (x 1)
  • Loctite 243 Threadlocker 0.5 ml bottle (x1)
  • Installation instructions

If you run multiple rifles with different rail systems, the Gen4 Mounting Posts are built to work across all of them. Speaking of different rails, we all know that not all rails are created equal. To achieve proper fitting, as you move from one rifle to the next, you may need to adjust the attachment tension. Our toolless tension knob lets you achieve the perfect tension in seconds. Moving you BipodeXt from one rifle to the next is a toolless and fast process.

PLEASE NOTE:

  • The 2.75″ long Single Mounting Post Gen4 is designed to attach to the center of our Unimount. It does not mount to its fore- or aft-mounting areas.
  • The fore and aft mounting areas in our Unimount are meant to take our Dual Mounting Posts Gen4 kit.

 

 

Related products