BipodeXt PRS Competition Gen4 Rifle Stabilizer

The BipodeXt PRS Competition Gen4 Rifle Stabilizer is designed for shooters who need serious stability from rifles that don’t offer long mounting rails. Building on the proven BipodeXt concept, the PRS introduces two extending tubes for virtually double the extension capability of the MSR series, letting you move the resting point far forward of the traditional bipod area—often beyond the muzzle of many rifles.

One Mount for ARCA & Pic Rails

With Gen4, the PRS now ships standard with our A&P (ARCA & Picatinny) Combo Mounting Post. Instead of swapping posts or reconfiguring hardware, you can clamp directly to ARCA Swiss and Picatinny rails with the same mount. Earlier generations required separate ARCA and Picatinny posts and a conversion process to move between them. Gen4 fixes that.

Our A&P (ARCA & Picatinny) Combo Mounting Post:

• Clamps directly to both ARCA Swiss and Picatinny rails
• Has an easy to operate clamping tension knob (no tools required)
• Lets you move your stabilizer between rifles in seconds, with no tools and no post changes

If you run multiple precision rifles with different rail systems, the PRS Gen4 is built to work across all of them. Speaking of different rails, we all know that not all rails are built equal. Our toolless tension knob lets you achieve the perfect tension in seconds. Moving you BipodeXt from one rifle to the next is an entirely toolless process that takes mere seconds.

Extended Fulcrum for Serious Reach

The PRS Gen4 uses a single-post attachment to the fore-end and two extending tubes to push the support point forward:

• Two extending tubes provide virtually double the extension of the MSR series
• The resting point can be extended more than 26 inches forward of typical bipod placement, often beyond the muzzle
• Fully extended, the stabilizer measures about 31.5 inches; contracted, it measures under 16.5 inches
• The base tube has a 40 mm (1.575 inch) outside diameter, and the system weighs approximately 33 ounces

This extended-fulcrum geometry dramatically reduces how much your natural movement at the rear of the rifle is transmitted to the muzzle and to the target.

The Archimedes Advantage and Cant Correction

At the heart of BipodeXt is a simple lever principle: by shifting the support point farther forward, you gain mechanical advantage over movement at the rear of the rifle. The PRS Gen4 takes full advantage of this with its two-tube layout.

As a multi-tube model, the PRS also provides built-in cant correction:

• Round tubes and the clamp interface allow you to correct cant at the stabilizer
• In many cases, shooters can correct cant by operating the base clamp lever without coming out from behind the rifle
• You no longer have to fight the bipod or the terrain just to get the rifle leveled

If the only available rest is a tree trunk or a wall, the tubes can be rotated 90 degrees so you can rest your bipod against those surfaces. As always, ensure the bullet path is unobstructed before taking the shot.

Recoil Management and Shot Spotting

Running a BipodeXt does more than just calm your reticle:

• Recoil is easier to manage and feels more controlled
• Target re-acquisition time is seriously reduced
• Shooters frequently report that they can spot their own shots and impacts

For competition use, that means more usable feedback on every round and fewer wasted seconds trying to get back on target.

Interfaces and Accessories

The front plug on the PRS Gen4 accepts multiple bipod attachment types:

• Picatinny
• ARCA Swiss
• Harris (via a separate adapter)

Short Picatinny rails affixed to the outer tube allow you to mount accessories such as chronographs or other devices via appropriate adapters. The underside of the base is manufactured to ARCA Swiss specifications, allowing additional accessories, such as electronic levels, to be attached with ARCA-style adapters.

Built for Hard Use

The telescoping 3K carbon fiber tubes and precision-machined components are designed and assembled in the USA to meet demanding tolerance and durability requirements. The PRS Competition Gen4 Rifle Stabilizer is rated for cartridges up to .375 CheyTac when configured on Picatinny rails and up to .300 WM on ARCA rails, with a maximum supported rifle weight of 18 pounds.

The PRS Competition Gen4 Rifle Stabilizer ships without additional rails or accessories. If you need those, please visit our Accessories page.