The ultimate stabilizer – now in its 4th Generation
BipodeXt Gen4 moves your support point forward to increase stability and reduce muzzle movement. It’s lightweight, quick-detach, and built to swap between rifles fast — now with our Gen4 A&P Combo Mounting Post, so one post clamps to ARCA and Picatinny.
Geometric model (not a guarantee): With the same unintended input movement, dispersion decreases in proportion to support distance. Doubling the toe-to-support distance cuts modeled dispersion in half.
- Lightweight
- Rigid & Quick Detachable
- Reduced POI Shift
- Smoother Transitions
- Faster Follow-Up Shots
- Adaptability & Recoil Control
The Archimedes lever behind BipodeXt
Think of your rifle as a lever. Small unintended movement at the rear (the “short end”) creates a much larger effect at the muzzle (the “long end”). BipodeXt reduces that effect by moving the support point forward — closer to the muzzle — so the same input movement produces less angular error.
This is simple geometry: the farther forward the support, the smaller the cone of fire for the same movement. That’s why BipodeXt feels like it “calms” the sight picture, especially at distance.
BipodeXt uses the Lever/Fulcrum axiom but, to say it colloquially, it uses it the other way around. BipodeXt takes the Moment of Force (the shooter’s unintended movements) at the short end of the proverbial Lever and moves the Fulcrum further into the long end of the Lever (read: closer to the muzzle).
The result is that the shooter’s unintended movements down along the long end of the Lever are reduced. For our purposes, the “long end of the Lever” is that imaginary line going through the center of the barrel to the intended target.
Features
1. Gen4 A&P Combo Mounting Post: clamps to ARCA + Picatinny (no swapping mounts) 2. 40mm mounting rings provide precision machined mounting surfaces for optimal retention. 3. Quick adjustment lever for extension and retraction of extension tubes. 4. 3K carbon fiber extension tube: available in single or dual tube configurations. 5. 10-32 tapped holes ready to receive additional accessories. 6. Picatinny rail bipod attachment. 7. ARCA rail bipod attachment.
Gallery
Specifications
Assembled and quality-controlled in the USA, offering the popular BipodeXt accessory for your rifle. The BipodeXt Stabilizer offers carbon fiber tubes coupled with 6061 T6 aluminum components, all precisely engineered and assembled in Southern California. The low-profile, quick-detach mounting system allows for easy access and the ability to extend the resting point of your rifle system at a moment’s notice.
ASSEMBLED IN THE U.S.A.
MATERIAL and FINISHES
MOUNTING
This table shows the difference between each of the BipodeXt models, if you have any questions you can send us a message.
| BipodeXt Models | Maximum Supported Rifle Weight | OAL Contracted | OAL Extended | Weight | MSRP |
|---|---|---|---|---|---|
| Hunter Classic | 15 lbs. | 14.9 in | 21.0 in | 1 lb. 7 oz | $245 |
| MSR | 22 lbs. | 15.185 in | 22.0 in | 1 lb. 15 oz | $425 |
| MSR PRO | 30 lbs. | 15.185 in | 22.0 in | 2 lbs. 1 oz | $499 |
| PRS | 18 lbs. | 16.5 in | 31.9 in | 2 lbs. 1 oz | $639 |
| PRS PRO | 25 lbs. | 16.5 in | 31.9 in | 2 lbs. 3 oz | $699 |
| .50 Cal Single Tube | 50 lbs. | N/A | 19.6 in | 2 lbs. 1 oz | $739 |
| ELR Max Picatinny | 65 lbs. | 20.25 in | 39.2 in | 3 lbs. 11 oz | $999 |
| ELR Max A&P | 65 lbs. | 20.25 in | 39.2 in | 3 lbs. 15 oz | $1,175 |
